Denso BHT-202Q Bedienungsanleitung

Barcode Handy Terminal BHT-904B/BHT-914B User’s Manual

ix BHT-904B/BHT-914B Handling the BHT Mishandling of the BHT-904B/BHT-914B may result in electrical shock, overheating, or smoke generation. Please

86 BHT-904B/BHT-914B Select “3: BHT-Ir Protocol” at the PROTOCOL TYPE menu to display the screen on the right. nter the ID number of the BHT using th

87 Barcode Handy Terminal on condition setting for the user program (OPEN “COM:”) creae system mode setting can be used. Therefore, it is not necess

88 BHT-904B/BHT-914B [6] Defining the functions of the Shift key and Magic keys 1. 2. s ([1] [2] [3] [4] [5] [6] then press the ENT key. : SHIFT K

89 Barcode Handy Terminal “2: M1 KEY” - “6: M5 KEY”: Defining the Mx key functions 1. Select “2: M1 KEY” to “6: M5 KEY” at the SET KEY menu and the

90 BHT-904B/BHT-914B  Defining the Backspace/clear key function The Backspace/clear key deletes the last character entered (backspace). When this k

91 Barcode Handy Terminal[7] Setting the TCP/IP, FTP and DHCP Use the following procedure to change the TCP/IP, FTP and DHCP settings. 1. then pr

92 BHT-904B/BHT-914B “2: IP ADDRESS”: Setting the IP address cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) to highlight (2) The mode changes t

93 Barcode Handy Terminal 1. nd then press the NT key. 2. thePreironment : SERVER IP”: lays, allowing the setting to be entered with the lay) and a

94 BHT-904B/BHT-914B “2: OPTION”: Setting the FTP options Select “2: OPTION” at the SET FTP menu to display the screen on the “1: CR/LF”: e server OS

95 Barcode Handy Terminal 1. nu and then press the NT key. Thrrent setting. Pr Presto display the NETWORK ( creen for . Pr (DHCP) screen to retur T

x Barcode Handy Terminal Handling the CU  If smoke, abnormal odors or noises come from the CU, immediately unplug the AC adapter from the wall

96 BHT-904B/BHT-914B [8] Setting the user prog ram execution option Use the following procedure to set the user program execution option. 1. EXEC

97 Barcode Handy Terminal[9] Operation related to the drive Use the following procedure to carry out the operation related to the drive. 1. TEM

98 BHT-904B/BHT-914B [10] Setting the operation log Use the following procedure to set the operation log. 1. OPERATION LOG” at the SET SYSTEM 2/2

99 Barcode Handy Terminal4.5.7 BHT Operation Test (TEST Menu) Use the following procedure to perform a BHT operation test. the right. cts thPERSele

100 BHT-904B/BHT-914B [1]2. with the BHT. Up g, the BHT beeps once, and the rns blue. 3. digits, and data display at the sc e data and screen disp

101 Barcode Handy TerminalBarcode Type and Corresponding Characters Displayed on the Screen ID Characters Barcode Type Codemark Type1 Codemark Type2

102 BHT-904B/BHT-914B  Setting the Barcode reading Test Options Press F1 key at the TES reen to set the barcode reading test options. The screen dis

103 Barcode Handy Terminal[2] 1. en press the ENT ey. ays as shown on the right, and the BHT reads and writes ata to and from all areas of the RAM

104 BHT-904B/BHT-914B [3] Beeper scale test Use the following procedure to perform a beeper scale test. pon completion of this test, the BHT automat

105 Barcode Handy Terminal[5] LCD and indicator LED tests LED test. The TEST BEEPER screen displays as shown on the right. 2. ress the ENT key.

xi BHT-904B/BHT-914B To System Designers  When introducing BHTs in those systems that could affect human lives (e.g., medicines management syste

106 BHT-904B/BHT-914B 4. A 1-dot frame is displayed around the screen and the LED is illuminated en. ar key or press the SF and 5. ress the ENT key.

107 Barcode Handy Terminal[6] FThe file test allows deile test tailed information on program fi 1. elect “6: FILE” at the TEST menu and then press

108 BHT-904B/BHT-914B ◆ Font files (*.FN3/FN4) 1. ace/clear key to return to the previous sc ◆ 1. key Press the Backspace/clear key to return t

109 Barcode Handy Terminal◆ Other files (*.DAT, *.TXT) Press the Backspace/clear key to return to the previous screen. If four or more fields exist

110 BHT-904B/BHT-914B [7] Communication test Use the following procedure to perform a communication test. 1. Select “7: COMMUNICATION” at the TEST m

111 Barcode Handy Terminal3. d at the y. an error occurs, the tested slave BHT beeps three times and displays s. ( X X ) ta is different from the s

112 BHT-904B/BHT-914B  USB conneHave a USB cable ready and then connect the BHT to the hoction test 1. st. 2. TEST COMMUNICATION screen anuring

113 Barcode Handy Terminal[8] Key-entry, beeper and vibrator test Use the following procedure to perform a key entry, beeper and vibrator test. Sele

114 BHT-904B/BHT-914B [9] PING test Use the following procedure to run the PING test. 1. Select “9: PING” at the TEST menu and then press the ENT ke

115 Barcode Handy TerminalUpon completion of the PING test, the screen displays as shown on the und during the PING test. ok pl r of screen)right.

xii Barcode Handy Terminal Handling the CU  Never disassemble or modify the CU; doing so could result in an accident such as fire or malfunction

116 BHT-904B/BHT-914B  1. elect “2: SET PING” at the TEST PING menu and then press the NT key. ATA SIZSpecifies the data size of the echo request.

117 Barcode Handy TerminalPING Echo Request Transmission Timing (SEND TYPE) Two types of echo request send timings are available: TYPE 1 and TYPE 2.

118 BHT-904B/BHT-914B  1. elect “3: SET DEVICE” at the TEST PING menu and then press . c ey to return to the TEST PING menu. “3: SET DEVICE” (PING

119 Barcode Handy Terminal4.5.8 BHT system information. 1. 6: VERSION” at the SYSTEM MENU and then press the he SYSTEM INFORMATION screen displays a

120 BHT-904B/BHT-914B Functions for which licenses have been registered () [1] 1 ction that has been registered, and then press the ENT key to

121 Barcode Handy Terminal[2] U-911 System Information Display information. 1.2. Select “6: VERSION” at the ENTays as shown on the right. ress the

122 BHT-904B/BHT-914B 4.5.9 Downloading/Uploading Files by FTP (FTP MENU) Use the following procedure to download and upload files by FTP. the ENT NU

123 Barcode Handy Terminal2. ENT key. try (no guidance dio delete a single character, press the Backspace/clear ace/clear keys simult4. nter a sett

124 BHT-904B/BHT-914B [2] Uploading by FTP 1. the ENT key. The screen displays as shown on the right if uploadable files exist. . RECTORY]: Acq

125 Barcode Handy Terminal 3. Enter the directory and file name, or select a file, and then press the ENT key. DIPress the Backspace/clear key to ret

xiii BHT-904B/BHT-914B

126 BHT-904B/BHT-914B FTP Download/Upload Messages When the BHT is uploading or downloading files by FTP, the following messages will appear at the b

127 Barcode Handy TerminalResponse Messages from the FTP server w. estart marke eady aconnecti rt transferring. atus oka ection. d oka e t h e.

128 BHT-904B/BHT-914B 4tings following system initialization are as follows. o not change these settings unless necessary. Default .5.10 USB Communi

129 Barcode Handy TerminalUse the following procedure to set the USB communication settings. [1] 1. Select “1: USB” in the ICE menu and then press

130 BHT-904B/BHT-914B [3] TP RESTRICTIONS” in the MTP SETTING menu ss the ENT key. 2. Use the cursor keys ([▲] [▼])) or numeric keys ([1] [2] [3])

131 Barcode Handy Terminal[5] MTP DISP FILTER menu ” in the MTP SETTING menu and then press the ENT key. The MTP DISP FILTER menu (FILE ATTRBUTE)

132 BHT-904B/BHT-914B 4.5.11 Deleting Program/Data Files (“DELETE FILE” Menu) Delete program files or data files stored in the FLASH ROM. 1. The

133 Barcode Handy Terminal4.5.12 Deleting Font Files (DELETE FILE Menu) Delete font files stored in the FLASH ROM. If there is insufficient user area

134 BHT-904B/BHT-914B To delete font files: Use the cursor keys ([▲] [▼]) or numeric key ([1]) to highlight [1: Yes] and ace/clear key to return to t

135 Barcode Handy Terminal4ARAMETER Menu) t he same settings can be set at another BHT by copying the system pat computer and so on. le at another BH

BHT-904B/BHT-914B 1.1 System Configuration･･････････････････････････････････････････････ 2 Chapter 1 Outline This chapter descri

136 BHT-904B/BHT-914B [1] 1. Use th o highlight 2. hile the download is in progress, the screen displays as shown records/the toress the Backspace

137 Barcode Handy Terminal[2] Uploading the BHT system parameter file 1. Use the cursor keys ([▲] [▼]) or numeric key ([2]) to highlight [2: UPL

138 BHT-904B/BHT-914B 4.5.14 REMOTE WAKEUP Menu) 1. he SET REMOTE WAKEUP menu displays as shown on the right. : REMOTE WAKEUP]: Enables or disables

139 Barcode Handy Terminal4.5.15 Downloading/Uploading the System Message File (SYSTEM MESSAGE Menu) The system message file is a file (file name:

140 BHT-904B/BHT-914B [1]1. Use th 1]) to highlight aiting for the system message file to be downloaded. 2. hile the download is in progress, the

141 Barcode Handy Terminal[2] Uploading the system message file 1. Use the cursor keys ([▲] [▼]) or numeric key ([2]) to highlight [2: UPLOAD] a

142 BHT-904B/BHT-914B 4.5.16 1. he MODIFY MENU screen displays as shown on the right. : SYSTEM MODIFY]: Updates the BHT system. [2: CU-F/W MODIFY]:

143 Barcode Handy Terminal date File me of the BHT system update file to ile name. key. 2. rect file name. ress the SF key to change the entry mod

144 BHT-904B/BHT-914B [2] Updating the CU-911 system Update the CU-911 system after downloading the CU-911 system update file. (Refer to section “4.

145 Barcode Handy Terminal If the System Update File Does not Exist when Updating the CU-911 System Download the CU-911 system update file and upda

2 BHT-904B/BHT-914B 1.1 System Configuration This section describes the hardware required for the barcode data collection system used by the BHT and

146 BHT-904B/BHT-914B

BHT-904B/BHT-914B Chapter 5 Communication This chapter describes technical information relating to the IrDA communication functions

148 BHT-904B/BHT-914B 5.1 IrDA Communication The BHT has a built-in IrDA communication device that enables wireless transfer of programs and data

149 Barcode Handy Terminal 5.1.1 IrDA Communication Port Transmission Speed Communicating Device Transmission Speed BHT-900 Series 9600, 19200,

150 BHT-904B/BHT-914B 5.2 USB Communication The BHT can communicate with the host computer via the USB communication port. The Connection method “C

151 Barcode Handy Terminal 5.2.2 USB communication by MTP 1. Set the BHT USB connection mode to MTP. For details, refer to “4.5.10 USB Communi

152 BHT-904B/BHT-914B  Important  Receiving the BHT-BASIC data files (Method of specifying the field information) The data files received via th

153 Barcode Handy Terminal 5.3 Basic Communication Specifications and Parameters 5.3.1 Basic Communication Specifications The table below l

154 BHT-904B/BHT-914B  Transmission Code and Bit Order  All characters should be coded to 7 or 8-bit code for data transmission.  The standard

155 Barcode Handy Terminal 5.3.2 Communications Parameters In System Mode and user programs written in BHT-BASIC, you can set the communications p

3 Barcode Handy Terminal  Host Computer Allows you to edit, manage and download user programs and data, as well as downloading system programs. Mode

156 BHT-904B/BHT-914B

BHT-904B/BHT-914B Chapter 6 Maintenance This chapter describes battery replacement and daily procedures for taking care of the BHT.

158 BHT-904B/BHT-914B 6.1 Replacing the Battery Batteries are not included in the package. Have the battery specified by DENSO WAVE ready. Specified

159 Barcode Handy Terminal 4. Check the battery terminals on a new battery and indications on the BHT unit and then insert the battery in the directi

160 BHT-904B/BHT-914B 6.1.2 Charging rechargeable batteries When using rechargeable batteries, it is possible to charge with the BHT main body as fo

161 Barcode Handy Terminal  Note   If the LED flashes in green, it is impossible to charge the battery. When the LED flashes in green, stop cha

162 BHT-904B/BHT-914B 6.2 Daily Maintenance 6.2.1 Proper Care of the BHT Wipe any dirt from the BHT housing, charge terminals, and BHT or battery ca

BHT-904B/BHT-914B Chapter 7 Error Messages This chapter describes causes and countermeasures for error messages that display during BHT u

164 BHT-904B/BHT-914B 7.1 System Errors The error messages that display on the screen and the causes and countermeasures to be taken if an error occ

165 Barcode Handy Terminal Message BHT Response Cause Countermeasure The BHT displays this error message and automatically runs the execution program

4 BHT-904B/BHT-914B 1.1.2 Software Configuration This section describes the software used for BHT Series application development and application in

166 BHT-904B/BHT-914B Message BHT Response Cause Countermeasure The message continues to display. When the BHT is turned on, no user programs are fou

167 Barcode Handy Terminal 7.2 System Mode Errors When error messages display while running System Mode, refer to the following table and take appro

168 BHT-904B/BHT-914B Message Cause Countermeasure The file you attempted to upload is damaged. To upload the damaged file as is, press the [1] key.

BHT-904B/BHT-914B Chapter 8 Specifications This chapter describes the BHT-904B/BHT-914B specifications. 8.1 BHT-904B/BHT-914B Sp

170 BHT-904B 8.1 BHT-904B/BHT-914B Specification 8.1.1 Hardware Specifications Power supply (main power): AA alkaline battery (LR6) (x 2) or AA re

171 Barcode Handy Terminal 8.1.2 Barcode Specifications Supported Barcode Types Barcode Type Bar Dimensions Scan Magnification Universal product c

172 BHT-904B 8.1.3 Reading Performance Reading Reference Position Minimum Na ar Width Depth of Field Reading Distance and Area H11° As il

173 Barcode Handy Terminal *1 The dotted line ( ndicates that the width othe barcode label (* the readable widththe BHT-904B/BHTbar: Wide bar = 1 :

174 BHT-904B 8.1.4 IrDA InterfaSpecification: IrDA Ver1.3 Low Power phys a (Except transmission speed: speed: Between BHT units: 9600 to 15200

BHT-904B/BHT-914B Chapter 9 Appendices This chapter describes the principal specifications of the CU-900 and CH-900 Series (option)

5 Barcode Handy Terminal [3] Software Used at the BHT Unit The BHT unit FLASH memory has a system area and user area, with the system program stor

176 BHT-904B/BHT-914B 9.1 CU-900, CH-900 Specifications 9.1.1 Hardware Specifications CU-901 CU-911 CU-921 Power supply: 100/230 V AC (Using dedic

177 Barcode Handy Terminal 9.1.3 Interface Specifications CU-901 The CU-901 RS-232C interface connector uses Dsub-9P. Signal Direction Pin.

178 BHT-904B/BHT-914B CU-911 The CU-911 has an IEEE802.3-compliant Ethernet interface port (100Base-TX). Ethernet Interface Port (RJ45 jack) o

179 Barcode Handy Terminal 9.2 When File Transfer is Not Possible This section describes the causes and remedies when file transfer is not possible

180 BHT-904B/BHT-914B Error No. Cause Details Remedy The BHT communication interface specification is illegal. Specify IrDA (Optical) if connected

181 Barcode Handy Terminal An attempt was made to download a file with field width differing from that of the data file already existing in the BHT.

182 BHT-904B/BHT-914B Error No. Cause Details Remedy BHT-Ir/BHT protocol was used for transfer for a BHT-BASIC 4.0 format program file (*.PD4). Us

183 Barcode Handy Terminal

Barcode Handy Terminal BHT-904B/BHT-914B User’s Manual First Edition, November 2010 Second Edition, March 2011 The purpo

i BHT-904B/BHT-914B Preface Thank you for using the BHT-904B/BHT-914B DENSO WAVE Barcode Handy Terminal. Please read this manual thoroughly prior t

6 BHT-904B/BHT-914B  Font File These files are required to display JIS 1 and 2 standard Kanji characters at the BHT unit LCD display. By using font

7 Barcode Handy Terminal 1.2 Component Names and Functions 1.2.1 BHT Front/Rear (2)(1) (4)(3) (7)(5) (6) (8)(11)(10)(9)

8 BHT-904B/BHT-914B 1.2.2 Keypad/BHT Screen The BHT key functions can be set at user programs. The diagram below shows an example of settings for ea

9 Barcode Handy Terminal NO. Key Name Function and Description (9) ～ Function keys Used to select functions. * The functions of the function

10 BHT-904B/BHT-914B If the system display is set to ON at the system settings or in the user program, icons display at the bottom of the screen (def

BHT-904B/BHT-914B Chapter 2 BHT Preparation This chapter presents information on how to load the battery, turn ON/OFF the BHT pow

12 BHT-904B/BHT-914B 2.1 “BHT Preparation” Procedure Follow the steps below to prepare the BHT for use. 2.2 Loading the Battery (Page 13) First loa

13 Barcode Handy Terminal2.2 Loading the Battery Batteries are not included in the package. Have the battery specified by DENSO WAVE ready. Specified

14 BHT-904B/BHT-914B Mishandling of the battery may result in electrical shock, overheating, smoke generation,combustion, or blowout. Please read t

15 Barcode Handy Terminal2.2.1 Battery Power Level Indicator Confirming at the Power Level Icon The battery power level can be confirmed at the batt

ii Barcode Handy Terminal Customer Registration and Inquiries Customer Registration To allow us to provide our customers with comprehensive service a

16 BHT-904B/BHT-914B 2.3 Wearing the Hand Strap Wear the hand strap to prevent the BHT from being accidentally dropped during use. 2.3.1 Attaching

17 Barcode Handy Terminal2.4 Initial Setup (Setting the date, time, and message language) Turn ON the power after inserting the batteries into the B

18 BHT-904B/BHT-914B 5. Press numeric key [1] or [2] and ENT key to select either of the following items. 1: Easy Pack Ad Activates the easy operatio

19 Barcode Handy Terminal2. Press the SCAN key to activate the Easy Pack Ad for BHT-900. The screen on the right appears.  Point  When the M1 key

20 BHT-904B/BHT-914B 2.6.2 Turning the Power OFF after Data Back-up 1. Hold down the Power key ( ) for at least 3 seconds. The message right disp

21 Barcode Handy TerminalIf Scandisk finds a broken file or files, the screen on the right appears. (If any broken files exist, the screen on the r

22 BHT-904B/BHT-914B About “$$BRKLST.SYS” If Scandisk finds an invalid file(s), it will automatically create the "$$BRKLST.SYS" file. To ch

BHT-904B/BHT-914B Chapter 3 Basic Operation This chapter describes basic operations such as barcode reading, numeric data entry

24 BHT-904B/BHT-914B 3.1 Reading Barcodes Follow the procedure below to read barcodes. 1. Turn the BHT power ON. Blue LED ONPower keyLight 2. P

25 Barcode Handy Terminal When unable to successfully read barcodes… Cause Countermeasure Specular reflection When the light is focused on the print

iii BHT-904B/BHT-914B About this Manual  Due to improvements and so on, the content of this manual may be subject to change without prior notice.

26 BHT-904B/BHT-914B 3.2 Numeric Data Entry Enter numeric data such as product volume with the numeric keys and Enter ( ) key. If numeric data is e

27 Barcode Handy Terminal 3.4 Changing the Default Settings The following settings can be changed at the MENU screen. Item Details Setting VOLUME

28 BHT-904B/BHT-914B 3. Use the [◄] and [►] cursor keys to select the setting. ～ 4. Press any of the following keys to exit the sett

29 Barcode Handy Terminal 3.5 Transmitting Data Three methods for transmitting data which the BHT collects to the host computer are possible; via Ir

30 BHT-904B/BHT-914B 3.5.1 IrDA communication  When performing data communication between BHT units Point the BHT IrDA communication ports toward e

31 Barcode Handy Terminal 3.5.2 USB Communication Request  Use a USB2.0 compatible mini-B cable, sold separately.  Connect the BHT to

32 BHT-904B/BHT-914B

BHT-904B/BHT-914B Chapter 4 System Operation This chapter describes how to initialize and update the system, start up a user progra

34 BHT-904B/BHT-914B 4.1 Initializing the BHT System By initializing the system, program files and data files downloaded to the BHT user area are de

35 Barcode Handy Terminal4.1.1 Selecting the Memory Area to be Initialized 1. Press the Power key ( ) while holding down the SF, M1 and [0] keys tog

iv Barcode Handy Terminal Viewing this Manual  About the Bookmark The PDF Bookmark function can be used to jump to the Contents page. <Procedur

36 BHT-904B/BHT-914B 4.1.2 Selecting the Message Version (English/Japanese/Simplified Chinese/Traditional Chinese/Korean/Thai) 1. When the screen dis

37 Barcode Handy Terminal4.1.4 Performing System Initialization 1. The screen displays as shown on the right during system initialization. 2. U

38 BHT-904B/BHT-914B 4.2 Updating the System 4.2.1 Updating the BHT System The BHT system update procedure is as follows. BHT System Update File Dow

39 Barcode Handy Terminal4.2.2 CU-911 System Update The CU-911 system update procedure is as follows. CU-911 System Update File Download ↓ CU-911

40 BHT-904B/BHT-914B 4.3 Executing User Programs User programs (application programs) can be executed using the following methods. Select the most a

41 Barcode Handy TerminalSeveral directory management program examples are given below. The names of the files used in these examples are as follows.

42 BHT-904B/BHT-914B  (Example 3) Recommended download method After system initialization, first download the program to be executed simply by press

43 Barcode Handy Terminal4.4 System Mode By starting up the BHT in System Mode and selecting each menu, the following operations can be performed in

44 BHT-904B/BHT-914B 4.4.2 System Mode Basic Operation Menu Selection and Display Use the following procedure to select and display each menu. 1. Pre

45 Barcode Handy TerminalSetting Value Selection  Operation example Use the following procedure to select setting values. Select the setting it

v BHT-904B/BHT-914B  Searching by Word The PDF search function can be used to jump to the target page by entering words or characters related to th

46 BHT-904B/BHT-914B 4.4.3 SYSTEM MENU Configuration Menu Configuration for Items Displayed at the SYSTEM MENU Screen Select the item with the numeri

47 Barcode Handy Terminal [8] and ENT keys [7] and ENT keys Downloading/Uploading by FTP Refer to section “4.5.9Downloading/Uploading Files by FTP

48 BHT-904B/BHT-914B Menu Configuration for Items Not Displayed at the SYSTEM MENU Screen Press the corresponding numeric key while holding down the

49 Barcode Handy Terminal4.5 SYSTEM MENU 4.5.1 Executing Setup (“SETUP” menu) The BHT setup can be effectively executed using the BHT Setting and clo

50 BHT-904B/BHT-914B 2. Execute the master-side setup. Setup is performed with the BHT Setting and other SYSTEM MENU functions. 3. Perform the settin

51 Barcode Handy Terminal5. Select “2: SLAVE” from the slave-side CLONE MENU. Master Side Slave Side 6. Align the BHTs as shown below and t

52 BHT-904B/BHT-914B When communication is complete, the CLONE MENU (screen 1) reappears. In the event of a communication error, screen 2 appears.

53 Barcode Handy Terminal4.5.2 Executing User Programs (EXECUTE PROGRAM Menu) Individually select and execute user programs downloaded to the BHT. Us

54 BHT-904B/BHT-914B 4.5.3 Downloading Files (DOWNLOAD Menu) Download files to the BHT user area from other devices such as the host computer.  Poi

55 Barcode Handy Terminal2. Select either “1: FILE” or “2: HT<-->HT COPY” and press the ENT The screen displays as shown on the right indicatin

vi Barcode Handy Terminal Related Documentation  BHT-BASIC Programmer’s Manual (BHT-900 Series) This is an instruction manual used to create handy

56 BHT-904B/BHT-914B 5. When downloading is complete, the beeper sounds once and the screen displays as shown on the right. hen using the Ymodem prot

57 Barcode Handy Terminal4.5.4 Uploading Files (UPLOAD Menu) Upload files stored in the BHT user area to another device. Refer to “5.2.2 MTP Communic

58 BHT-904B/BHT-914B 2. Select “1: FILE”, “2: ALL FILES” or “3: HT<-->HT COPY” and press the ENT key. he screen displays as shown on the right.

59 Barcode Handy Terminal4. By executing the BHT-BASIC 4.0 Transfer Utility or similar program, the screen displays as shown on the right and file 5.

60 BHT-904B/BHT-914B 4.5.5 Copying Files between 2 BHT Units Copy “all files (excluding font files)”, “setting data”, and the “date and time” sanothe

61 Barcode Handy Terminal  Setting data which are copied between the BHT units ● settings ● ● Infrared light interface settings Key settings ● Rem

62 BHT-904B/BHT-914B 4.5.6 System Environment Settings (SET SYSTEM Menu) STEM” at the SYSTEM MENU and then press the ENT key. nu screen displays as s

63 Barcode Handy Terminal[1] Setting the auto-start execution program Use the following procedure to set the auto-start execution program. 1. Select

64 BHT-904B/BHT-914B [2] Setting the message version, system status indication and screen display compatible mode tatus indication and screen disp

65 Barcode Handy Terminal3. The SET DISPLAY menu displays as shown on the right. Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to highlight

vii BHT-904B/BHT-914B SAFETY PRECAUTIONS  Be sure to observe all these safety precautions. Please READ through this manual carefully. It will enabl

66 BHT-904B/BHT-914B  System Status Indication DescriptiTurning ON the system status indication displays the following icons at the bottom of the s

67 Barcode Handy Terminal[4] Setting the special barcode reading parameters 1. Select “4: BARCODE” at the SET SYSTEM menu and thtThe SET BARCODE m

68 BHT-904B/BHT-914B  “2: DECODE LEVEL”: Decode level Set the decode level (barcode reading tolerance level). Press [◄] to decrease the setting valu

69 Barcode Handy Terminal “2: OPEN BAR SETTINGS”: Setting for the “function in which the reading setting is 1. e BARCODE menu anE screen. : BUZZE

70 BHT-904B/BHT-914B [2] Buzzer/LED control 1. Select “2: BUZZER/LED” at the OPEN BAR SETTING menu and ppears. when the barcode is read g mechanism

71 Barcode Handy Terminal[3] Read barcode Select [3: READ CODE] at the OPEN BAR SETTING menu and then reading to ON/OFF. The highlighted settings o

72 BHT-904B/BHT-914B “1: EAN/UPC”: Detail setting of the EAN/UPC reading 1. tting screen appears. Enables or disables reading of the EAN-13/UPC-A. C

73 Barcode Handy TerminalEAN/UPC 3/3 (UPC-E setting) disables reading of the UPC-E. “2: 1ST CHARACTER”: Sets the first and second characters (country

74 BHT-904B/BHT-914B “2 tting of the interleaved 2of5 (ITF) reading 1. S the SET BARCODE menu and then press the ENT key. ears. “1“2mum number of

75 Barcode Handy Terminal“3: CODABAR”: Detail setting of the Codabar (NW-7) reading key. pears. gits. gits. 1. Select “3: CODABAR” at the SET BARCOD

viii Barcode Handy Terminal Handling the battery Mishandling of the battery may result in electrical shock, overheating, smoke generation, combusti

76 BHT-904B/BHT-914B “4: CODE39”: Detail setting of the Code 39 reading 1. Select “4: CODE39” at the SET BARCODE menu and then press the ENT key. The

77 Barcode Handy Terminal2. Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to select the desired item. Press the cursor keys ([◄] [►]) to se

78 BHT-904B/BHT-914B (RSS-Limited setting) Enables or disables reading of the RSS-Limited (GS1 Databar Limited). (RSS-Expanded setting) Enables or di

79 Barcode Handy Terminal“8: STF”: Detail setting of the standard 2of5 (STF) reading 1. SelecTh“1 Point  Always set the minimum number of digits t

80 BHT-904B/BHT-914B [5] Setting the communication environment The communication environment settings following system initialization are follows.

81 Barcode Handy TerminalU the communication environment settings 1. The SET COMMUNIC menu screen displays as shown on the r2. U ] [▼]) or numeric k

82 BHT-904B/BHT-914B “2: PROTOCOL”: Communication protocol options setting screen Select “2: PROTOCOL” to display the screen shown on the right. be e

83 Barcode Handy Terminal nment 1. NICATION menu nd then press the ENT key. Th2. r keys ([▲] [▼]) or numeric keys ([1]) to select the deress the

84 BHT-904B/BHT-914B  “3: COM PORT”: Setting the interface port 1. Select “3: COM PORT” at the SET COMMUNICATION menu and then press the ENT key. T

85 Barcode Handy TerminalSelect “1: Ymodem” at the PROTOCOL TYPE menu to display the screen on the right. “1: CR/LF”: Specifies handling for line del