Denso GT10B-SB Bedienungsanleitung PDF herunterladen (Seite 107)

Chapter 14 Bar-Coded Parameter Menu for Bluetooth

Adapters (BA10-RKU)

14.1 Configuring the Bluetooth

Adapter from the Scanner

The scanner can configure the Bluetooth

adapter by transferring the adapter parameter settings held in the scanner

memory via the Bluetooth

wireless link using the following procedure.

Scanner

Store the Bluetooth

adapter parameter settings

into the scanner memory.

Use the scanner to scan the bar-coded parameter menu prepared for Bluetooth

adapters (Section 14.2) to store their settings into the scanner memory.

Note: Using the configuration software ScannerSetting designed for scanners also

allows parameter settings for Bluetooth

adapters. It, however, requires connecting

the adapter via a USB-COM or RS-232C interface to the host computer. For details,

refer to the "Bluetooth

Adapter User's Manual."

↓

Bluetooth

adapter

Power the Bluetooth

adapter.

Power the Bluetooth

adapter.

Note: Any type of interfaces that power the Bluetooth

adapter can be used,

regardless of the interface setting made in the adapter. For the interfacing procedure,

refer to the "Bluetooth

Adapter User's Manual," Chapter 2.

↓

Bluetooth

adapter

Switch to the setup mode.

Hold down the SETUP button provided on the bottom of the Bluetooth

adapter fo

at least 0.5 second with a pin or the like to switch to the setup mode.

Note: Leaving the Bluetooth

adapter for 3 minutes or more after depression of the

SETUP button automatically exits the setup mode.

↓ Scanner Indicator LED: Remains Off

Bluetooth

adapter Interface/power supply LED: Flashes orange

Bluetooth

status display LED (blue): Flashes slowly

(The Bluetooth

adapter, as a slave, is waiting for a master to connect.)

Scanner

Establish the Bluetooth

wireless link.

Use the scanner holding Bluetooth

adapter parameter settings to scan the

ar code

printed on the bottom of the Bluetooth

adapter.

↓ Scanner's indicator LED: Flashes blue

(The scanner beeps three times and initiates a Bluetooth

wireless link, as a master.)

Scanner → Bluetooth

adapter

Transfer the Bluetooth

adapter parameter settings.

After establishment of the Bluetooth

wireless link, the scanner inquires of the

Bluetooth

adapter about the current status and transfers the Bluetooth

adapte

parameter settings stored in the memory.

Tip: If the scanner cannot receive an acknowledge response from the Bluetooth

adapter, it cancels the parameter setting sequence. Both the scanner and Bluetooth

adapter automatically return to standby for initiation of the Bluetooth

wireless link.

↓ Scanner Indicator LED: Flashes green

Bluetooth

adapter Bluetooth

status display LED (blue): Flashes rapidly

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 143 144

Kommentare zu diesen Handbüchern

Keine Kommentare

Denso GT10B-SB Bedienungsanleitung Seite 107

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Barcodeleser Denso GT10B-SB