First Issue: March 2005DSCA P/N: LA484007-1810 Printed in the U.S.A.DENSO SALES CALIFORNIA, INC.3900 Via Oro AvenueLong Beach CA 90810-1868800-264-
7Operating ModesOffi ce Pro 36 operates in 2 modes, FAN Only and COOL. When in FAN Only mode, the unit circulates the surrounding air. When in COOL mod
8Drain Pump (Optional)A drain pump allows continuous operation and eliminates the need for drain tanks.• When the water collects to level (A) in the
9Cleaning Method➀ Remove dust from the element with a vacuum cleaner, or rinse in cold or lukewarm water. If the element is extremely dirty, wash wit
10Check the following points before calling a qualifi ed technician.SYMPTOM POSSIBLE CAUSE REMEDYUnit does not operate➀ Ground fault breaker tripped
11TECHNICAL SPECIFICATIONSITEM/FEATURES OFFICE PRO 36Rating Conditions dry bulb 95º F (35º C) wet bulb 83º F (28.2º C) humidity 60%Specifi
LIMITED WARRANTYDENSO SALES CALIFORNIA, INC. (“DENSO”) warrants its MOVINCOOL Products only to the extent stated in its official writt
First Issue: March 2005DSCA P/N: LA484007-1810 Printed in the U.S.A.DENSO SALES CALIFORNIA, INC.3900 Via Oro AvenueLong Beach CA 90810-1868800-264-
LIMITED WARRANTYDENSO SALES CALIFORNIA, INC. (“DENSO”) warrants its MOVINCOOL Products only to the extent stated in its official writt
TABLE OF CONTENTSFOREWORD ...1Defi nition of Terms ...
1FOREWORDCongratulations on purchasing the MovinCool portable air conditioner. This manual explains how to assemble, install and operate the MovinCool
2INSTALLATIONChoosing an Installation SiteCAUTION: Following are some precautions to consider before choosing your in-stallation site. Please review
3UNLOCKEDLOCKEDFRONT AND BACK HANDLESMoving the UnitUnlock the casters and push the MovinCool unit, using the side handles, to a fl at, level Plugging
4FEATURESOP36 Features• An electronic control panel which allows the user to control the unit’s operation easily.• Dual fan speeds (either High or Lo
57. Temperature Scale LED - Illuminates to indicate the current temperatures being displayed are either in °C or °F; also used to display the clock w
6How to Set a Program➀ Setting a START TIME Press the Program SET button. The Program SET button and START TIME LEDs will illuminate. Press the HRS
Kommentare zu diesen Handbüchern