Denso BHT-825QW Bedienungsanleitung PDF herunterladen (Seite 151)

136

BHT-825Q series

[9] PING test

Use the following procedure to perform a PING test.

1. Select “9: PING” at the TEST menu and then press the ENT key.

The TEST PING screen displays as shown on the right.

“1: RUN PING”: Runs the PING test.

“2: SET PING”: Displays the PING parameter setting screen.

“3: SET DEVICE”: Displays the PING device setting screen.

Refer to the following section for details of the above items.

Press the BS/C key to return to the TEST menu.

 “1: RUN PING” (PING Test Screen)

1. Select “1: RUN PING” at the TEST PING menu and then press the

ENT key.

The current setting values display, and the BHT waits for the transmission

count to be entered.

To change the number of echo requests displayed, enter the desired value

using the numerical keys.

To delete a single character, press the BS/C key. To delete the entire entry,

press and hold the BS/C key, or press the SF key and BS/C key

simultaneously.

2. Press the ENT key.

When the PING test starts running, the message shown on the right

displays.

Press the BS/C key to abort the PING test.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 252 253

Keine Kommentare

Denso BHT-825QW Bedienungsanleitung Seite 151