Denso BHT-825QW Bedienungsanleitung PDF herunterladen (Seite 185)

170

BHT-825Q series

 Setting up the master station

1. Select “3: MASTER” in the SET BLUETOOTH menu and then press

the ENT key.

The current settings are displayed.

[1: PEER BD_ADDR]: Sets up the remote device address of the connection

target.

[2: PASSKEY]: Sets up the Bluetooth

passkey for the master

station

[3: TIMEOUT]: Sets up the timeout period in seconds.

[4: SECURITY]: Sets up the security mode for the master station.

Press the Backspace/clear key to return to the SET BLUETOOTH menu.

2. Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4]) to select

the menu and then press the ENT key.

Entry mode is activated and the cursor is displayed.

To set up the “4: SECURITY”, use the cursor keys ([◄] [►]) to highlight and set the desired setting.

3. Use the numeric and period (.) keys to enter the desired value.

“PEER BD ADDR”; 12-digit hexadecimal numbers only

The ENT key is not available until the twelfth digit is entered.

“PASSKEY”: Up to 16 characters

“TIMEOUT”; Valid Range: 1–255, Default: 30 seconds

For the Bluetooth

passkey and the security mode details, refer to “Chapter 5 Communication” – “5.3

Bluetooth

wireless communications”.

To switch the entry mode (between numeric and alphabet entries), press the SF key.

To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold

the Backspace/clear key or press the SF and Backspace/clear keys simultaneously.

4. Press the ENT key.

5. Press the Backspace/clear key to return the SET BLUETOOTH menu.

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 252 253

Keine Kommentare

Denso BHT-825QW Bedienungsanleitung Seite 185