Denso BHT-825QW Bedienungsanleitung PDF herunterladen (Seite 209)

194

BHT-825Q series

[2] Updating the CU-811 system

Update the CU-811 system after downloading the CU-811 system update file.

(Refer to section ”4.2.2 CU-811 System Update” for details.)

1. Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight

[2: CU-F/W MODIFY] and then press the ENT key.

The CU-F/W MODIFY menu screen on the right displays.

[1: DO IT]:

Updates the CU-811 system.

[2: FILENAME]:

Displays the filename to be used for updating the CU-811 system.

Press the BS/C key to return to the SYSTEM PARAMETER menu.

2. Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight

[1: DO IT] and then press the ENT key.

The CU-811 system is updated.

The screen on the right displays upon completion of the update.

Press the BS/C key to return to the CU-F/W MODIFY menu.

♦ When the Displayed File Name Differs from the CU-811 System Update File

If the name of the file displayed at [2: FILENAME] differs from the name of the CU-811 system update file

to be used for updating the system, enter the correct file name.

1. Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: FILENAME] and then press

the ENT key.

The mode changes to entry mode and the cursor displays.

2. Use the numerical keys and dot key to enter the correct file name.

Press the SF key to change the entry mode (numerical entry (no guidance display) and alphabet entry).

To delete a single character, press the BS/C key. To delete the entire entry,

press and hold the BS/C key, or press the SF key and BS/C key simultaneously.

3. Press the ENT key to set the entered file name.

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 252 253

Keine Kommentare

Denso BHT-825QW Bedienungsanleitung Seite 209