Denso BHT-825QW Bedienungsanleitung PDF herunterladen (Seite 92)

2D Code Handy Terminal

 “3: OPEN BAR SEETTINGS”: Setting “The FUNCTION TO

ASSIGN SCAN SETTINGS WITH THE SYSTEM SETTINGS”

1. Select “3:OPEN BAR SEETTINGS” at SET QRCODE and then press

the ENT key.

OPEN BAR SETTING screen displays.

1: READ MODE: Read mode

The READ MODE screen displays

2: BUZZER/LED: Speaker/LED control

The SPEAKER/LED screen displays

3: READ CODE: Read code

The READ CODE screen displays

Refer to the following section for details of the above items.

2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3]) to select the item to be set and press

the ENT key.

3. Press the BS/C key to return to the SET QRCODE menu.

[1] Read mode

1. Select “1:READ MODE” at OPEN BAR SETTING and then press the

ENT key.

SET READ MODE screen displays.

The highlighted settings are the current settings.

“1：AUTO OFF”：Auto-off mode

If the trigger operation is not operated, it turnes off the illumination LED

after the certain amount of time.

“2：MOMENTARY”：Momentary mode

Only while you hold down the trigger swich, the illumination LED lights.

“3：ALTERNATE”：Alternate mode

The illumination LED is turned ON/OFF repeatedly, every time trigger switch

is pressed over.

“4：CONTINUOUS”：Continuous lighting mode

The illimination LED lights continiously.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 252 253

Keine Kommentare

Denso BHT-825QW Bedienungsanleitung Seite 92